Post It Notebook

This slideshow requires JavaScript.

I got this Post It Notebook/minibook as an RAK from FancyNancy.  Thank you Nancy!

I did not add actual measurements as it depends on the size Post It notepad you are using but the margins are accurate.
The concept is the same to put it together no matter what size Post It notepad you use.

Basically, it is two pieces of chipboard sized 1/2 inch larger than the Post It pad, covered with handmade paper (sized 3/4 inch larger than the chipboard pieces), and end papers (two pieces -sized 1 inch less than the chipboard pieces) added to the interior covers.

A piece of crimped paper is used as the flexible spine binding.
You can recycle crimped light bulb packaging if you don’t have a crimper.
Attach the crimped paper to the back first, glue down the post it note pad,  then place the cover on the top and glue down the crimped paper on the top.  A hot glue gun work fine.

An additional piece of covered chipboard and of a stamped dragonfly gives it some dimension.